Bajaj 150 Scooter
We recently got a Bajaj 150 scooter off Trade me. It’s complete and runs well but has a couple of things that need fixed. It’s got potential and would be great for Jane to learn on as is.
The single seat is just annoying so have ordered a new dual seat from Scoots RS along with some other bits and pieces for this one and the old 92L2.
I know we all try to get S/H bits and bobs where we can and fix things up but sometimes its just cheaper to buy what you need new.
I have dealt with Scoot RS for over 3 years now and they have been pretty good with no problems and excellent products at a good price.
Prices are in US dollars but with the exchange rate it’s all good however the freight costs can be ridiculous.
ORDER:
| 100510 x 1 | Chrome trim beading | $1.49 |
| V0807-SS x 1 | Gas tank cap stainless steel | $13.99 |
| V0810 x 1 | Gas tank cap lock | $1.59 |
| V0813 x 1 | Tank rubber gasket | $5.49 |
| V0915-BC x 1 | Panel trim VBC Super/VLB Sprint/GT/SS180 stainless steel | $4.49 |
| V0943 x 1 | Legshield badge VBC Super/VLB Sprint/Rally180 (Vespa) | $6.49 |
| V1211-SS x 1 | Fender crest VLB Sprint stainless steel | $5.49 |
| V1339 x 1 | Steering lock VLB Sprint/etc | $5.99 |
| V1402 x 1 | Speedometer rim VBB/GS150/VLB Sprint/SS180 | $2.59 |
| V1404 x 1 | Speedometer gasket VBB/GS150/VLB Sprint/SS180 | $0.79 |
| V1413-BB-GR x 1 | Grips rubber 21mm Option: Gray | $3.29 |
| V1413-GR x 1 | Grips rubber 24mm Option: Gray | $3.29 |
| V1416 x 2 | Handlebar levers | $9.98 |
| V1650 x 1 | Cable set gray VLB Sprint/Rally/etc. | $16.49 |
| V1802 x 1 | Light-horn switch | $8.99 |
| V1824 x 1 | Headlight rim stainless steel VLB Sprint/VSC SS180/VLA | $6.79 |
| V1835-L1 x 1 | Rear tail light lens VL/VB1/Allstate | $7.79 |
| V2015-BL x 1 | Dual seat Option: Black | $53.99 |
| V2022 x 1 | Dual seat pin and nut | $2.09 |
Subtotal: $161.10
Shipping: $88.95
Total: $250.05
I broke the kickstart off Janes scooter burning around the section in the dark before she had a chance to ride it! Bugger…
I managed to get a mate to weld it back on for me which was a bit of a mish as the kickstart shaft was pretty munted but he got there in the end.
Cheers Nathan.