Search

 

20150826_212923 20150828_175739 20150828_175433 20150826_214423 20150826_214335 20150826_210541 20150826_210208 Canscootlogo

Sally the Skelly

Sally the Skelly

The skeleton (from Greek σκελετός, skeletós “dried up”) is the body part that forms the supporting structure of an organism.

Sally the Skelly is the current pilot for Elsie the Lambretta scooter and has been keen to get out and ride but alas, she has no eyes to see where she is

Continue reading Sally the Skelly

Elsie the Lambretta update 3

Elsie the Lambretta update 3 The lambretta 125LC Was produced in Italy between 1950 and 1951 with a total of 42500 units. With 125 cc it has a Bore/Stroke of 52×58 mm and a carburetor Dellorto MA16. This model has 3 gears and 4.3 horse power, going up to 65-70 km/h with a consumption of

Continue reading Elsie the Lambretta update 3

Elsie the Lambretta update 2

Elsie the Lambretta update 2

After a bit of wire bushing and a bit of a clean Elsie is ready to go outside to the paint booth for painting. Good old matt black and silver should look OK. I masked everything up with some paper out of the printer as it was all I had

Continue reading Elsie the Lambretta update 2

Elsie the Lambretta update 1

Elsie the Lambretta update 1

I managed to source a L/H side panel off ebay for the LC125 Lambretta frame I got from a local guy.

It came from a very helpful German trader and is actually off an NSU Lambretta. Nick, one of the scooterists in the know, had said that this may be

Continue reading Elsie the Lambretta update 1

1952 Lambretta LC 125

1952 Lambretta LC 125 Was produced in Italy between 1950 and 1951 with a total of 42500 units. With 125 cc it has a Bore/Stroke of 52×58 mm and a carburetor Dellorto MA16. This model has 3 gears and 4.3 horse power, going up to 65-70 km/h with a consumption of 50 km/l. The lambretta

Continue reading 1952 Lambretta LC 125