Bajaj scooter – Moto 2019

Bajaj scooter – Moto 2019 Things have been a bit slow on the scooter front over the last year with one thing and another. The MotoTT 2019 is fast approaching and the Bajaj is getting some much needed love for the event. The last time out, on this event in […]

Read more

1979 Honda XL500S – Fabrication

1979 Honda XL500S – Fabrication Other than building the seat base, the exhaust system and fittings there hasn’t been too much “fabrication” to do on this bike so far. There are a couple of things that do need sorted out, other than the electrical system, wheels, brakes, etc, etc; Handlebars, […]

Read more

1979 Honda XL500S – Frame 2

1979 Honda XL500S – Frame 2 While sorting out the tank the seat has now become the next main focus because of where the rear of the tank will mount. There are plenty of cafe racer style seats available online, at reasonable cost but they might not necessarily fit. Some […]

Read more

Elsie the Lambretta’s new shed

Elsie the Lambretta’s new shed So finding parts for a 67 year old scooter still hasn’t got any easier. Some engine parts and what not have appeared on ebay but freight costs have proved to be prohibitive. Even with a functioning engine the LC still would be a tough restoration […]

Read more

1979 Honda XL500S

1979 Honda XL500S While scooters are what I generally like to work on and ride, I have had a number of different bikes over the years. One of my favorites was a 1979 Honda XL500s. It was one of those dual purpose bikes that you used on the road but […]

Read more

1966 Vespa SS180 project

1966 Vespa SS180 project The Super Sport, or S.S., was the successor to the G.S. 160 and was built from 1964 to 1968. With the exception of the increase in cc’s, the motor and suspension design are very similar on the two scooters. On the other hand, the styling of […]

Read more

1958 Douglas 92L2 update 3

    1958 Douglas 92L2 update 3 The original 8″ wheels on this have now been upgraded to 10″ with the standard PX wheel on the back and a ScootRS, atomic branded, GS150 replica conversion rim on the front. The front wheel has plenty of clearance from the guard and […]

Read more

1958 Douglas 92L2 update 2

1958 Douglas 92L2 update 2 The PX motor installation has provided some challenges although I never expected this would be easy. Basically it seems there are 3 brackets available for changing the original Douglas 125 engine for a PX – two specifically for the PX200 and another for a PX150 or […]

Read more

1958 Douglas 92L2 update 1

  1958 Douglas 92L2 update 1 Scooters made in the 1950’s had different frame styles and engines than the more recent scooters. Engine side cowl has a bump that cuts into the frame. There is a small door below the choke and fuel levers which hinges toward the headset. For models […]

Read more

Douglas Vespa Wideframe project 1

Douglas Vespa Wideframe project 1 Scooters made in the 1950’s had different frame styles and engines than the more recent scooters. To differentiate them from 60’s and later era machines they have the following physical attributes: Engine side cowl has a bump that cuts into the frame. There is a small […]

Read more